A few simple steps can save you from losing your favorite photos and files. Learn about AppleCare+ and the Apple limited warranty coverage, start a service request for your Mac, and find out how to prepare your Mac for service. If you've got music on your Mac that you want to sync to your iOS device you can use the Finder starting in macOS.

Three OptionsRELATED:There are several options for this, and you’ll need to choose one:. Paid Third-Party Drivers: There are third-party NTFS drivers for Mac that you can install, and they’ll work quite well. These are paid solutions, but they’re easy to install and should offer better performance than the free solutions below. Free Third-Party Drivers: There’s a free and open-source NTFS driver you can install on a Mac to enable write support.

Unfortunately, this take a bit of extra work to install, especially on Macs with the new, added in 10.11 El Capitan. It’s slower than paid solutions and automatically mounting NTFS partitions in read-write mode is a security risk. Apple’s Experimental NTFS-Write Support: The macOS operating system includes experimental support for writing to NTFS drives.

However, it’s off by default and requires some messing around in the terminal to enable it. It isn’t guaranteed to work properly and could potentially cause problems with your NTFS file system. In fact, we’ve had it corrupt data before. We really don’t recommend using this.

It’s disabled by default for a reason.We highly recommend paying for a third-party NTFS driver if you need to do this as the other solutions don’t work as well and are more work to set up. The Best Paid Third-Party Driver: Paragon NTFS for Maccosts $19.95 and offers a ten-day free trial. It’ll install cleanly and easily on modern versions of macOS, including macOS 10.12 Sierra and Mac OS X 10.11 El Capitan. It really does “just work”, so it’s the best option if you’re willing to pay a small amount of money for this feature.You also won’t have to fiddle with terminal commands to manually mount partitions, insecurely mount partitions automatically, or deal with potential corruption as you will with the free drivers below. If you need this feature, paying for software that does it properly is worth it. We cannot stress this enough.If you own a Seagate drive, be aware that Seagate offers so you won’t have to purchase anything extra.You could also purchase, which costs $31 and offers a fourteen-day free trial.

But Paragon NTFS does the same thing and is cheaper. The Best Free Third-Party Drivers: FUSE for macOSThis method is free, but it requires a good bit of work, and is less secure. To make your Mac automatically mount NTFS partitions in read-write mode, you’ll have to temporarily disable System Integrity Protection and replace one of Apple’s built-in tools with a binary that is more vulnerable to attack. So this method is a security risk. However, you can use FUSE to mount NTFS partitions in read-write mode manually if you don’t mind using the Terminal.

This is more secure, but it’s more work.First, download and install it. Use the default options when installing it.RELATED:You’ll also need Apple’s command line developer tools installed to continue. If you haven’t installed them yet, you can open a Terminal window from Finder Applications Utilities and run the following command to do so: xcode-select -installClick “Install” when you’re prompted to install the tools.RELATED:In addtion, you’ll need to download and install if you haven’t already installed it on your Mac. Copy-paste the following command into a Terminal window and press Enter to install it: /usr/bin/ruby -e '$(curl -fsSL Enter and provide your password when prompted. The script will automatically download and install Homebrew.Once you’ve installed the developer tools and Homebrew, run the following command in a Terminal window to install ntfs-3g: brew install ntfs-3gYou can now manually mount NTFS partitions in read/write mode. From a terminal window, run the following command to create a mount point at /Volumes/NTFS. You only need to do this once. Sudo mkdir /Volumes/NTFSWhen you connect an NTFS drive to the computer, run the following command to list any disk partitions: diskutil listYou can then identify the device name of the NTFS partition. Just look for the partition with the WindowsNTFS file system.

In the screenshot below, it’s /dev/disk3s1.The NTFS partition was probably automatically mounted by your Mac, so you’ll need to unmount it first. Run the following command, replacing /dev/disk2s1 with the device name of your NTFS partition.

Sudo umount /dev/disk2s1To mount the drive, run the following command, replacing /dev/disk2s1 with the device name of your NTFS partition. Sudo /usr/local/bin/ntfs-3g /dev/disk2s1 /Volumes/NTFS -olocal -oallowotherYou’ll see the file system mounted at /Volumes/NTFS. It will also appear on your desktop as a normal mounted drive.

You can eject it normally when you want to unplug it.If you’re happy manually mounting partitions with the above instructions, you don’t have to continue.RELATED:If you want to make your Mac automatically mount NTFS drives you connect in read-write mode, you’ll need to.Warning: You probably don’t want to do this! The warn that this is a security risk. You will be replacing the NTFS mount tools in your Mac with the ntfs-3g tools, which will run as the root user. Because of the way Homebrew installs software, malware running on your Mac could overwrite these tools. It’s probably not work the risk, but we’ll explain how to do if if you want to take the risk.Reboot your Mac and hold Command+R while it’s booting. It’ll boot into a special environment.Launch a terminal from the Utilities menu in recovery mode and run the following command: csrutil disableOnce you have, reboot your Mac normally.From the Mac desktop, open a Terminal window again and run the following commands to make ntfs-3g function: sudo mv /sbin/mountntfs /sbin/mountntfs.originalsudo ln -s /usr/local/sbin/mountntfs /sbin/mountntfsLastly, re-enable System Integrity Protection. General organic and biochemistry lab manual. Reboot your Mac and hold Command+R while it’s booting to enter recovery mode.

Launch a terminal in recovery mode and run the following command: csrutil enableOnce you have, reboot your Mac. NTFS-write support should be functioning now.To undo your changes and uninstall everything, you’ll need to first disable System Integrity Protection. After you do, run the following commands: sudo rm /sbin/mountntfssudo mv /sbin/mountntfs.original /sbin/mountntfsbrew uninstall ntfs-3gYou can then uninstall FUSE for macOS from its panel in the System Preferences window and re-enable System Integrity Protection.You can see why instead now, huh? Apple’s Experimental NTFS-Writing Support: Don’t Do This, SeriouslyWe don’t recommend the below method because it’s the least tested. This might not work properly, so don’t blame us or Apple if you experience problems.

It’s still unstable as of macOS 10.12 Sierra, and it may never be fully stable. This is really just here for educational purposes.First, be sure that your drive has a convenient single-word label. If it doesn’t, change its label.

This will make this process easier.You’ll first need to launch a terminal.

If you’re still using a Mac OS X the time will come when your computer won’t boot, or a problem may arise where you can’t take control of the device, and booting from an OS X installation media will be required.

This is why it’s recommended that you make a Mac OS X bootable USB when your Mac is in working conditions. However, if you find yourself on a scenario where your device (iMac, MacBook Pro, Air, Mac Pro or Mini) is not responding and you happen to have a Windows device, then you can still be able to make a USB bootable installation media for your Mac OS X to reinstall the operating system using the Recovery Assistant.

These instructions will also work for Windows users, who are running Mac OS X on a virtual machine and need to upgrade to the latest version. For instance, to OS X Yosemite.

Things to know before proceeding

Before you dive into this guide, you’ll need a few things:

Downloading openrct2 for mac os. Install OpenRCT2 on macOS - Quickstart Guide Install OpenRCT2. Use the links below to download OpenRCT2. The latest release is a stable, well-tested build, but may have fewer features than the latest development builds. The development builds are analogous to beta versions - they should work, but don't expect everything to be perfect. Download latest release Download latest development build.

• A broken Mac computer with Mac OS X.
• A trial copy of the TransMac software.
• One high quality USB flash drive with 16GB of storage.
• A copy of Apple’s macOS (DMG file).

Now that you have all the necessary ingredients, you’re ready to make a Mac OS X bootable USB using the DMG file of the operating system with the steps below.

How to create Mac OS X bootable USB installation media

Before you can use TransMac, you may first need to partition your USB flash drive with a GPT partition, as a normal MBR partition may not work. To do this, you’ll need to use the Diskpart command-line utility on Windows.

Setting up GPT partition

Use these steps to set up a USB drive with a GPT partition:

1. Open Start on Windows 10.

2. Search for Command Prompt, right-click the top result and select the Run as Administrator option.

3. Type the following command to open Diskpart and press Enter:

4. Type the following command to determine the USB flash drive and press Enter:

5. Type the following command to select the storage and press Enter:

   Quick tip: The select disk 1 command as an example, but you have to replace 1 with the number of the flash drive you want to use.

6. Type the following commands to delete everything from the USB thumb drive and press Enter:

7. Type the following command to convert the drive into a GPT partition and press Enter:

8. Type the following command to select the new partition and press Enter:

After you complete the steps, the USB flash drive from MBR to GPT format, you can use the steps below to create a bootable USB installation media to install Mac OS X.

Creating USB install media

Use these steps to create a bootable media to install Mac OS X:

1. Download and install a copy of TransMac.

   Quick note: TransMac is a paid software, but it has a 15-day trial solution, that give us more than enough time to move the DMG files to the USB drive from Windows. (If you want to support the developer, you can purchase the full version.)

2. Insert the USB drive that you’ll use to fix your installation of OS X. (Remember that all the data in the USB will be erased. Make sure you take off any important documents.)

3. Right-click the TransMac software icon and Run as administrator. (You’ll be prompted to Enter Key or Run, because we’ll be using it once, click the Run option.)

4. On the left pane, you’ll see all the Windows PC drives listed, right-click the USB drive that you’re intending to use to reinstall Apple’s OS X and select the Restore with Disk Image option.

5. In the warning dialog box, click the Yes button.

6. Use the Restore Disk Image to Drive dialog box to browse for the DMG file with the installation files for Mac OS X Yosemite in this case, and click the OK button to create a bootable USB of the operating system.

   Now, you’ll have to wait a long time. No kidding. It could take one or two hours to complete the process depending on your computer and other variables.

Once your bootable USB installation media is ready, remove it and insert it into your Mac, power it on, holding down the Option key, and select the USB you just created to reinstall Mac OS X.

If you’re having issues trying to create a bootable media, you can get a USB flash drive that comes with Mac OSX ready to install.

Update September 23, 2019: This guide has been revised to make sure it includes the latest changes.